Model |
KDS8102
BF
|
KDS8102
BW
|
KDS8103
BF
|
KDS8103
BW
|
KDS8104
BF
|
KDS8104
BW
|
Pass height
|
50 mm |
45 mm |
80 mm |
75 mm |
100 mm |
95 mm |
Maximum pass width |
210 mm |
Belt Width
|
160 mm |
140 mm |
160 mm |
140 mm |
160 mm |
140 mm |
Display |
7-inch color TFT LCD |
Operation method |
Touch panel (Start, Stop and Home are direct push buttons) |
Preset memory |
Maximum 200 |
Product packaging |
Both general and aluminum-evaporated film-packaged products |
Detection method |
Simultaneous 2-frequency magnetization detection method |
Belt speed |
10 to 90 m/min (variable speed depending on Product No.) |
Maximum product weight Note 1 |
5 kg [BF (Non-waterproof) type can support up to 10 kg as an option. BW (Waterproof) type can support up to 15 kg. However, the belt speed is 5 to 49 m/min] |
Metal detection |
Rejection signal output and beep, or belt stop and beep |
Power requirements |
100 to 120 Vac +10% –15% or 200 to 240 Vac +10% –15%, single phase, 50/60 Hz, 200 VA, rush current 62 A (typ.) (20 ms or less) |
Mass |
90 kg |
92 kg |
90 kg |
92 kg |
92 kg |
94 kg |
Environmental conditions |
0° to 40°C, relative humidity 30% to 85%, non-condensing
|
Protection class
|
IP30 compliance
|
IP66 compliance |
IP30 compliance |
IP66 compliance |
IP30 compliance |
IP66 compliance |
Exterior |
BF (Non-waterproof) type: painted [Indicator and detector head: stainless steel (SUS304)] BW (Waterproof) type: stainless steel (SUS304)
|
Data output |
USB port (USB2.0), Ethernet interface (10BASE-T, 100BASE-TX)
|